The oxygen sensor unit measures the oxygen level in your tent or room and is used by your Box Altitude system to monitor it. Its internal sensors wear over time, so they need replacing every 12–18 months to keep readings accurate.
Looking after your oxygen sensor
-
Replace every 12–18 months. Sensor accuracy drops with age.
-
Keep it between 10 and 30 °C. Store and use the sensor in that range.
-
Keep it out of direct sunlight. UV exposure can damage the sensor materials and electronics.
-
Check it regularly. Look for physical damage and verify the sensor's calibration and readings.
How to replace the internal sensors
-
Power off. Turn the sensor unit off and disconnect it from power.
-
Open the housing. Remove the three screws on the back and gently open the housing to reach the circuit board.
-
Remove the old sensors. Lift the circuit board out if you need to, noting how it is connected. The old sensors may be lightly glued in place, so loosen them gently. Handle the components carefully and don't use excessive force.
-
Fit the new sensors. Seat them in their slots, making sure they are oriented correctly, then refit the circuit board and check every connection.
-
Close it up. Put the housing back together and refit the three screws.
-
Test it. Power the unit on and check that the oxygen reading is working correctly.
Not sure about any step? Contact us and we'll talk you through it.